Catalyst - Discs stuck in Output\Optional Bin Insert


Issue: When discs are loaded to the external output bin, the disc gets stuck and is "standing" in the bin, causing an obstruction to other discs. 

Cause: A combination of the angle of the bottom of the bin and disc surface causes friction that prevents the disc from sliding into correct position. 

Resolution: Install the Optional Bin Insert into the external output bin. This insert changes the angle of the disc at the bottom of the bin, allowing discs to properly slide on top of each other. 
Please note: The maximum capacity will be reduced from 100 discs when the insert is being used. 


Was this article helpful?
1 out of 1 found this helpful
Have more questions? Submit a request