2000i - Using the Rimage recorders as readers (2000i Software Suite).


By default, Rimage 2000i Software Suite uses your PC drive to read the master disc for a Copy Disc job. To use the Rimage recorders as the readers, follow these steps:

  • Open QuickDisc. The Rimage system initializes.
  • After initialization, select the Rimage System button. The Rimage System window opens.
  • Select the Settings button.
  • Select the Reading tab.
  • In the Preferred Reader section, select the Recorders radio button.
  • Select OK.
  • Close the Rimage System window.


Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request